Table of Contents
Advertisement
34 ULEAD PHOTOIMPACT USER GUIDE
To change and add a Gallery thumbnail preset:
1. Select a Gallery thumbnail.
2. Click Thumbnail menu commands or
right-click a thumbnail, then select
Modify Properties and Apply. The
dialog box for that effect appears.
3. Modify the settings of your thumbnail.
Tip: Click Add in the dialog box to store a
modified thumbnail in the EasyPalette
for future use. This adds a new
thumbnail without replacing an
existing one.
4. Click OK to apply the settings to the
active image.
Note: To update a particular thumbnail effect without adding a new thumbnail to the
EasyPalette, select Properties from Thumbnail menu commands. This
only works for special effect thumbnails.
Using Variations in the EasyPalette galleries
Some effects in the EasyPalette Gallery can be adjusted using the Variations
command.
To adjust effects using Variations:
1. Select a gallery thumbnail.
2. Click Thumbnail menu commands and select Variations. You can also right-
click on the thumbnail then select Variations.
3. The Variations: (Effect) dialog box opens. A number of thumbnails will be
displayed showing the filter applied to the image or object in varying degrees.
4. Double-click the thumbnail or select the thumbnail then click OK to apply the
effect.
Note: After you apply the effect, when you go back to the Variations dialog box of
the same effect, the available thumbnails will have varying degrees from
before. You can continue to choose the thumbnails until you achieve your
desired effect.
Advertisement
Table of Contents
