Table of Contents
Advertisement
Lights
The Lights effect allows you to add a spotlight or soft ambient light to an image,
selection area or object. It uses a combination of Brightness and Contrast
adjustments to create the light and shadows effects.
To add a Light effect:
1. Select Effect: Lighting - Lights.
Click Options.
2. In the dialog box adjust these
settings:
• Exposure The amount of light
on the image. Exposure
settings range from 0 and
200%. The higher the value,
the more light on the image.
• Ambience brightness The
general light over the whole
image. Click or right-click the
color box to specify its color.
• Light color and brightness
The color of the light focus can
be selected from the color
box. Use the sliders to set the
intensity.
• Light angle Drag the light
angle nodes (or set the
Skew, Spread, Distance, and
Elevation settings manually).
3. Click OK.
CHAPTER 6: SPECIAL EFFECTS 219
Original image
Lights are cast on the center of the image to
emphasize the wine glass at the middle.
Advertisement
Table of Contents
