Error Symptoms - IBM 8646 - Eserver xSeries 220 Hardware Maintenance Manual

Error Code/Symptom
215-XXX-000 (Failed IDE
CD-ROM test)
217-XXX-000 (Failed BIOS
Fixed Disk test)
Note: If RAID is configured,
the fixed disk number refers
to the RAID logical array.
217-XXX-001 (Failed BIOS
Fixed Disk test)
Note: If RAID is configured,
the fixed disk number refers
to the RAID logical array.
217-XXX-002 (Failed BIOS
Fixed Disk test)
Note: If RAID is configured,
the fixed disk number refers
to the RAID logical array.
217-198-XXX (Could not
establish drive parameters)
264-XXX-0NN (NN = SCSI ID
of failing Tape Drive)
264-XXX-999 (Errors on
multiple tape drives, see
error text for more info)
301-XXX-000 (Failed
Keyboard test)
405-XXX-000 (Failed Ethernet
test on controller on the
System Board)
405-XXX-00N (Failed Ethernet
test on adapter in PCI slot N)
415-XXX-000 (Failed Modem
test)

Error symptoms

General
CD is not working properly. 1. Clean the CD.
FRU/Action
1. CD-ROM Drive Cables
2. CD-ROM Drive
3. System Board
1. Fixed Disk 1
1. Fixed Disk 2
1. Fixed Disk 3
1. Check cable and termination
2. SCSI Backplane
3. Fixed Disk
1. Tape Cartridge, if user executed the Read/Write Tape Drive test (XXX = 256)
2. SCSI or power cable connected to the tape drive with SCSI ID NN
3. Tape drive with SCSI ID NN – refer to Help and Service Information appendix of
tape drive's User Guide.
4. I/O Legacy Board or SCSI Controller – run SCSI Controller diagnostic to
determine of SCSI bus is functioning properly.
1. See error messages/text in the PC Doctor error log for detailed information on
each individual tape drive error.
1. Keyboard
1. Verify that Ethernet is not disabled in BIOS.
2. System Board
1. Adapter in PCI slot N.
2. System Board
1. Cable
2. Modem
3. System Board
FRU/Action
2. Run CD-ROM diagnostics.
3. CD-ROM Drive
97
Symptom-to-FRU index