IBM 8646 - Eserver xSeries 220 Hardware Maintenance Manual page 34

Ethernet teaming messages:
26
Hardware Maintenance Manual: xSeries 220 Type 8646
Table 6. NDIS (Windows NT or Windows 2000) driver teaming messages for the Ethernet
controller
Event ID Type
01 Error
02 Error
03 Error
04 Error
05 Error
06 Informational Explanation: Team nn. Primary adapter is initialized. Action:
Informational Explanation: Team nn. Secondary adapter is initialized. Action:
07
08 Informational Explanation: Team nn. Virtual adapter or Team is initialized.
09 Informational Explanation: Team nn. Primary adapter is switching over.
10 Warning
11 Informational Explanation: Team nn. Secondary adapter took over. Action:
12 Warning
13 Informational Explanation: Team nn. Secondary adapter has rejoined the
14 Informational Explanation: Team nn. Secondary adapter link is up. Action:
15 Error
16 Informational Explanation: Team nn. An adapter has re-established the link.
17 Informational Explanation: Team nn. Preferred primary adapter has been
18 Informational Explanation: Team nn. Preferred secondary adapter has been
Description
Explanation: Team Name and physical adapter name are the
same. This is an invalid configuration. Action: Reconfigure the
adapter team by double-clicking the PROSet icon in the
control panel.
Explanation: Unable to allocate required resources. Action:
Free some memory resources and restart.
Explanation: Unable to read required registry parameters.
Action: Reconfigure the adapter team by double-clicking the
PROSet icon in the control panel.
Explanation: Unable to bind to physical adapter. Action:
Reconfigure the adapter team by double-clicking the PROSet
icon in the control panel.
Explanation: Unable to initialize an adapter team. Action:
Reconfigure the adapter team by double-clicking the PROSet
icon in the control panel.
None.
None.
Action: None.
Action: None.
Explanation: Team nn. Adapter link down. Action: Make sure
the adapter is functioning properly.
None.
Explanation: Team nn. Secondary adapter is deactivated from
the Team. Action: Make sure the secondary adapter is
functioning properly and that the adapter cable is securely
connected to the LAN.
Team. Action: None.
None.
Explanation: Team nn. The last adapter has lost its link.
Network connection has been lost. Action: Shut down the
server and replace the adapters; then, restart the server to
reestablish the connection.
Network connection has been restored. Action: None.
detected. Action: None.
detected. Action: None.