Adapter retainer
Before you begin:
v Read "Safety information" on page 111.
v Review the information in "System reliability considerations" on page 44.
To remove the adapter retainer, do the following:
1. Power-off the server, if it is on.
2. Unplug the server.
3. Remove the side cover (see "Removing the side cover" on page 45).
4. Remove all adapter cards (see "Installing an adapter" on page 49).
5. Rotate the adapter retainer to the open position.
6. Grasp the adapter retainer and gently slide the top and bottom tabs out of the
notches.
89
FRU information (service only)