Poe Port Configuration - NETGEAR GS108T-200NAS Software Administration Manual

GS108T and GS110TP Smart Switch Software Administration Manual
3. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
4. Click Refresh to update the screen with the current information.
The PoE Configuration page also provides the following information:
Table 2-5. Global PoE Status Information Fields
Field
Power Status
Nominal Power
Threshold Power
Consumed Power

PoE Port Configuration

Use the PoE Port Configuration page to configure per-port PoE settings.
To display the PoE Port Configuration page, click System  PoE  Advanced  PoE Port
Configuration.
Figure 2-11
2-20
Description
Indicates whether the PoE capability is on or off.
Indicates the nominal amount of power the switch can provide to all ports.
Shows the amount of power the system can consume before the system will
not provide power to an additional port.
Shows the total amount of power currently being delivered to all ports.
v1.0, April 2010
Configuring System Information