•
"Timer Global Configuration" on page 2-22
•
"Timer Schedule Configuration" on page 2-23
PoE Configuration
Use the PoE Configuration page to view global PoE power information and to configure PoE
SNMP trap settings.
To display the PoE Configuration page, click System PoE Basic PoE Configuration.
Note: You can also access the PoE Configuration page by clicking System PoE
Advanced PoE Configuration.
Figure 2-10
To configure PoE trap settings:
1. Select the appropriate radio button to enable or disable SNMP traps.
2. Click Apply to apply the new settings to the system.
Configuring System Information
GS108T and GS110TP Smart Switch Software Administration Manual
v1.0, April 2010
2-19