Mac Address Table - NETGEAR GS108T-200NAS Software Administration Manual

GS108T and GS110TP Smart Switch Software Administration Manual

MAC Address Table

The MAC Address Table contains information about unicast entries for which the switch has
forwarding and/or filtering information. This information is used by the transparent bridging
function in determining how to propagate a received frame. Use the search function of the MAC
Address Table page to display information about the entries in the table.
To access this page, click Switching Address Table  Basic  Address Table.
Figure 3-36
To search for an entry in the MAC Address Table:
1. Use the Search By field to search for MAC Addresses by MAC Address, VLAN ID, or
Interface.
• MAC Address: Select MAC Address from the menu and enter a six-byte hexadecimal
MAC address in two-digit groups separated by colons, then click Go. If the address exists,
that entry will be displayed. An exact match is required.
• VLAN ID: Select VLAN ID from the menu, enter the VLAN ID, for example, 100. Then
click Go. If any entries with that VLAN ID exist they are displayed.
3-54
v1.0, April 2010
Configuring Switching Information