Table of Contents
Advertisement
GS108T and GS110TP Smart Switch Software Administration Manual
e. Click the orange bar to display the available ports and select the port(s) you to include in
the outbound filter. Packets with the MAC address and VLAN ID you selected will be
transmitted only out of ports that are in the list. Destination ports can be included only in
the Multicast filter.
2. To delete a configured MAC Filter, select it from the menu, and then click Delete.
3. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
4. If you make changes to the page, click Apply to apply the changes to the system.
MAC Filter Summary
Use the MAC Filter Summary page to view the MAC filters that are configured on the system.
To display the MAC Filter Summary page, click Security Traffic Control, and then click the
MAC Filter MAC Filter Summary link.
Figure 5-19
5-34
v1.0, April 2010
Managing Device Security
Hide quick links:
Advertisement
Table of Contents
