Secure Http Configuration - NETGEAR GS108T-200NAS Software Administration Manual

GS108T and GS110TP Smart Switch Software Administration Manual
4. In the Maximum Number of HTTP Sessions field, specify the maximum number of HTTP
sessions that can exist at the same time. The value must be in the range of (0–16). The default
value is 16. The currently configured value is shown when the Web page is displayed.
5. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
6. If you make changes to the page, click Apply to apply the changes to the system.

Secure HTTP Configuration

Secure HTTP enables the transmission of HTTP over an encrypted Secure Sockets Layer (SSL) or
Transport Layer Security (TLS) connection. When you manage the switch by using a Web
interface, secure HTTP can help ensure that communication between the management system and
the switch is protected from eavesdroppers and man-in-the-middle attacks.
Use the Secure HTTP Configuration page to configure the settings for HTTPS communication
between the management station and the switch.
To display the Secure HTTP Configuration page, click Security  Access, and then click the
HTTPS  HTTPS Configuration link.
Figure 5-10
5-16
v1.0, April 2010
Managing Device Security