Input Mode - Marantz SR5005 User Manual

ENGLISH ENGLISH DEUTSCH DEUTSCH
Setting items
Progressive Mode Auto : The video signal is automatically detected and the appropriate
Set an appropriate mode is set.
progressive conversion Video1 : Select mode suitable for video playback
mode for the source video Video2 : Select mode suitable for video and 30-frame film material
signal. playback.
BD DVD VCR This item can be set when "i/p Scaler" is set to anything other than
"OFF".
GAME z AUX1
SAT
z
TV
Aspect Full : Output at 16:9 aspect ratio.
Set the aspect ratio for the Normal : Output at 4:3 aspect ratio.
video signals output to the
"Aspect" can be set when "i/p Scaler" is set to anything other than
HDMI.
"OFF".
BD DVD VCR
GAME z AUX1
SAT
z
TV
50
Remote control operation
buttons
FRANÇAIS FRANÇAIS ITALIANO ITALIANO ESPAÑOL ESPAÑOL
Setting details
Move the cursor
(Up/Down/Left/Right)
NEDERLANDS NEDERLANDS SVENSKA SVENSKA

Input Mode

The input modes available for selection may vary depending on the input source.
Setting items
Input Mode Auto : Automatically detect input signal and perform playback.
Set the audio input modes HDMI : Play only signals from HDMI input.
for the different input Digital : Play only signals from digital input.
sources. Analog : Play only signals from analog input.
7.1CH INPUT : Only signals input from the 7.1CH INPUT terminal will be
played back.
• "HDMI" can be set for input sources for which "HDMI" is assigned at
"Input Assign" (vpage 48).
• "Digital" can be set for input sources for which "Digital" is assigned at
"Input Assign" (vpage 48).
• If the input source is set to "TV" or "Game", it cannot be set to "Analog".
• When digital signals are properly input, the
the display. If the
connector assignment and the connections.
• If "HDMI Control" is set to "ON" and a TV compatible with the ARC is
connected via the HDMI MONITOR connectors, the input mode whose
input source is "TV" is fixed to ARC.
This can also be set by pressing
remote control unit.
Each time
changed as shown below.
Auto
Decode Mode Auto : Detect type of digital input signal and decode and play automatically.
PCM : Decode and play only PCM input signals.
Set the decode mode for
DTS : Decode and play only DTS input signals.
input source.
BD DVD VCR
• This item can be set for input sources for which
SAT GAME AUX1
"HDMI" or "Digital" is assigned at "Input Assign"
TV CD SIRIUS (vpage 48).
• Normally set this mode to "Auto". Set "PCM" and
"DTS" when inputting the corresponding input
signal.
• This can also be set by pressing
remote control unit.
Confirm the setting
Input Setup
Default settings are underlined.
Setting details
indicator lights on
indicator does not light, check the digital input
A/D
on the
A/D
is pressed, the setting is
HDMI Digital Analog
7 .1CH INPUT
D.MODE
on the
Return to previous menu