DAELIM S2-250 Service Manual page 90

LH. CRANKCASE COVER/CONTINUOUSLY VARIABLE TRANSMISSION
LOCK WASHER/LOCK NUT
DRIVE FULLEY
REMOVAL
● Remove the LH. crankcase cover.
● Loosen the Drive face flange nut with the drive face
● Remove the drive face.
LOCK NUT
WRENCH
● Remove the drive bolt from the movable drive face.
INSPECTION
● Check the drive bolt for cracks sepuration or abnormal
● Inspect the drive belt width.
● Remove the movable drive face assembly.
COLLAR
COLLAR COLLAR COLLAR COLLAR COLLAR COLLAR
COLLAR COLLAR COLLAR COLLAR
COLLAR COLLAR COLLAR COLLAR
COLLAR COLLAR COLLAR
● Remove the drive pulley collar.
holder.
or excessive wear.
SERVICE LIMIT : 22.0mm replace if below
8-3