FINAL REDUCTION
13-4
BEARING REPLACEMENT
(TRANSMISSION CASE COVER)
● Remove the transmission case cover bearings using the
● Remove the final shaft oil seal.
● Drive new bearings into the left crankcase.
● Install a new drive shaft oil seal.
FINAL REDUCTION
ASSEMBLY
● Install the drive shaft into the left crankcase.
DRIVE SHAFT
DRIVE SHAFT
DRIVE SHAFT
DRIVE SHAFT
DRIVE SHAFT
DRIVE SHAFT
DRIVE SHAFT
DRIVE SHAFT
DRIVE SHAFT
DRIVE SHAFT
DRIVE SHAFT
DRIVE SHAFT
DRIVE SHAFT
DRIVE SHAFT
DRIVE SHAFT
DRIVE SHAFT
DRIVE SHAFT
DRIVE SHAFT
● Install the final gear and final shaft into the left
bearing remover.
crankcase.