DAELIM S2-250 Service Manual page 71

COOLING SYSTEM
RADIATOR CAP
6-4
RADIATOR TESTER
AIR BENT TUBE
AIR BENT TUBE AIR BENT TUBE AIR BENT TUBE AIR BENT TUBE AIR BENT TUBE AIR BENT TUBE
AIR BENT TUBE AIR BENT TUBE AIR BENT TUBE AIR BENT TUBE
AIR BENT TUBE AIR BENT TUBE AIR BENT TUBE AIR BENT TUBE
AIR BENT TUBE AIR BENT TUBE AIR BENT TUBE
COOLING SYSTEM TEST
● Install the redicator cap onto the radiator tester.
● Press it with specified pressure and it must keep the
pressure for at least six seconds.
·Apply water to the cap sealing surface before the
test.
Radiator Cap Relief Pressure : 0.9±0.15kg/com
RADIATOR
INSPECTION
● Remove the front cover.
● Remove the under cover A.
● Inspect the radiator soldered joints and seams for leaks.
● Blow dirt out from between core fins with compressed
air.
REMOVAL
● Drain the coolant.
● Disconnect the air vent tube from the radiator filler.
● Remove the overflow tube clamp and disconnect the
overflow tube.
2