Air Cleaner; Spark Plug; Valve Clearance - DAELIM S2-250 Service Manual

CHECK GAP,
DEPOSITS
CHECK FOR
CRACKS

AIR CLEANER

● Loosen the 6 screws securing the air cleaner case cover,
● Loosen the 2 screws securing the air cleaner element
● Remove the air cleaner element.
● Wash away any accumulated dust or dirt, by gently

SPARK PLUG

0.6 ~ 0.7mm
● Remove the plug maintenance cover.
● Remove the spark plug cap and disassemble the plug.
● Check the plug for damage, contamination or deposits.
● If the spark plug is severely contaminated or damaged,
CHECK WASHER
FOR DAMAGE
● Always use a feeler gauge to check the gap.

VALVE CLEARANCE

● Remove the cylinder head cover.
INSPECTIONS / ADJUSTMENTS
remove it.
holder, remove it.
squeezing it in non flammable or high flash point
solvent.
•Using gasoline or low flash point solvents for
cleaning parts may result in a fire or explosion.
raplace with a new one. If the plug can be reused after
removing only the carbon, use plug cleaner and wire
brush to clean the plug.
GENUINE PLUG : DPR7EA9
SPARK PLUG : 0.9~1.0mm
TORQUE VALUE : 1.47~1.96kgf·m
•Make sure there is no dirt or debris on the seat of the
spark plug hole before inserting the spark plug.
•To prevent damage to the cylinder head, hand-
tighten the spark plug before using a wrench to
tighten to the specified torque.
•Do not overtighten the spark plug.
2-5