DAELIM S2-250 Service Manual page 79

COOLING SYSTEM
THERMOSENSOR
THERMOMETER
WATER HOSE
WATER HOSE WATER HOSE WATER HOSE WATER HOSE WATER HOSE WATER HOSE
WATER HOSE WATER HOSE WATER HOSE WATER HOSE
WATER HOSE WATER HOSE WATER HOSE WATER HOSE
WATER HOSE WATER HOSE WATER HOSE
6-12
THERMOSTAT THERMOSTAT THERMOSTAT THERMOSTAT THERMOSTAT
THERMOSTAT THERMOSTAT
THERMOSTAT THERMOSTAT THERMOSTAT THERMOSTAT THERMOSTAT THERMOSTAT
THERMOSTAT THERMOSTAT THERMOSTAT THERMOSTAT THERMOSTAT
AIR VENT TUBE
AIR VENT TUBE AIR VENT TUBE AIR VENT TUBE AIR VENT TUBE AIR VENT TUBE AIR VENT TUBE
AIR VENT TUBE AIR VENT TUBE AIR VENT TUBE AIR VENT TUBE
AIR VENT TUBE AIR VENT TUBE AIR VENT TUBE AIR VENT TUBE
AIR VENT TUBE AIR VENT TUBE AIR VENT TUBE
INSPECTION
● Suspen the thermosensor in a pan of water over a
burner and measure the resistance through the sensor
as the water heats up.
Temperature(° C) 50
Ω
Resistance( ) 154
INSTALLATION
● Apply a sealant to the themosensor threads and install
it into the thermostat housing.
● Connect the thermosensor wire.
● Fill the radiator with coolant.
● Install the center cover, met-in box and seat.
·Be sure to bleed air from the cooling system.
THERMOSTAT
REMOVAL
● Remove the seat, met-in box and center cover.
● Drain the coolant.
● Disconnect the thermosensor wire from the
thermosensor.
● Disconnect the water hose from the thermostat
housing.
● Disconnect the air vent tube from the thermostat
housing.
● Remove the mounting bolt and the thermostat housing
from the cylinder head.
● Remove the 2 bolts and separate the thermostat
housing halves.
● Remove the thermostat from the thermostat housing.
80 100 120
52 27 16