Rear Fork; Rear Wheel - DAELIM S2-250 Service Manual

REAR WHEEL / BRAKE / SUSPENSION / SWING ARM
INSTALLATION
● Install the brack caliper to the front fork and tighten the
● Connect the brcakhose to the caliper body and tighten 2
● Fill the break fluid to te upper limit line and bleed air.

REAR FORK

● Remove the muffler.
● Remove the rear breake caliper.
● Loosen the lower bolt securing the RH. rear cushion.
● Loosen 2 bolts securing the mud guard.
● Loosen the axle nut and remove the collar.
● Loosen 2 bolts securing the engine and remove the rear
● Rotate the inner bearing with finger and check it for
● Check the malfunction and replace if necessary.

REAR WHEEL

REMOVAL
● Remove the exhaust muffler.
● Remove the rear brake caliper.
● Remove the rear fork.
● Remove the rear axle collar.
● Remove the rear wheel.
bolt to specified torque.
TORQUE VALUE : 3.0kgf·m
oil bolts and washers to specified torque.
TORQUE VALUE : 3.4kgf·m
fork.
smooth operation.
15-5