Air Cleaner; Valve Clearance - DAELIM S2 125 Service Manual

RH. SHROUD
TIMING CHECKING
CYLINDER HEAD COVER CYLINDER HEAD COVER CYLINDER HEAD COVER
CYLINDER HEAD COVER CYLINDER HEAD COVER CYLINDER HEAD COVER CYLINDER HEAD COVER
CYLINDER HEAD COVER CYLINDER HEAD COVER CYLINDER HEAD COVER CYLINDER HEAD COVER CYLINDER HEAD COVER CYLINDER HEAD COVER
CYLINDER HEAD COVER CYLINDER HEAD COVER CYLINDER HEAD COVER CYLINDER HEAD COVER CYLINDER HEAD COVER
INSPECTIONS / ADJUSTMENTS

AIR CLEANER

● Loosen the 6 screws securing the air cleaner case cover,
remove it.
● Loosen the 2 screws securing the air cleaner element
holder, remove it.
● Remove the air cleaner element.
● Wash away any accumulated dust or dirt, by gently
squeezing it in non flammable or high flash point
solvent.
•Using gasoline or low flash point solvents for
cleaning parts may result in a fire or explosion.

VALVE CLEARANCE

● Remove the following parts.
-Luggage box. (⇨4-4)
-Center cover. (⇨4-5)
● Loosen the 4 cylinder head bolts.
•Inspect and adjust the valve clearance when the
engine is cool. (under 35 ° C / 95 ° F)
•Remove the cylinder head cover.
•Turn the flywheel counterclockwise, and align the
"T" mark on the flywheel with the index mark on
the RH. crank case cover.
•The piston at this time must be at the top dead center
of the compression stroke.
● Measure valve clearance with a feeler gauge.
VALVE CLEARANCE : Intake : 0.12±0.02mm
Exhaust : 0.12±0.02mm
2-5