Symantec ALTIRIS DEPLOYMENT SOLUTION 6.9 SP4 - V1.0 Manual page 421

RapiDeploy Command-line Switches (Continued)
Switch [parameters]
-forceoem
-frm:[name]
-grubdir:[dir]
-h
-i:[20..25]
Deployment Solution
Details
Function Forces the OEM partition to be restored. Use this
switch to overwrite an OEM partition on the hard disk with an
OEM partition in the image.
Example To restore an image and have the OEM partition in the
image replace an existing OEM partition on the hard disk, type
[filename]
rdeploy -md -f
See also -m[mode], -f[path & file name]
Function Specifies a FIRM file that contains a list of FIRM
commands to be executed after a restore. A FIRM file is a text
file containing FIRM commands to execute.
Example After a computer has received an image, you can copy
a file that is not in the image to the computer. Example: you
may want to copy a .cfg file that a computer needs but is not in
an image.
[filename]
rdeploy -md -f
In this example, you would have two files:
The file that includes the copy commands.
The file that you want copied to a computer, sample.cfg
Both of these files must be in the RapiDeploy/FIRM application
folder.
The FIRM file, firm.txt, could have the following FIRM command:
copy sample.cfg c:\sample.cfg
In this example, after the image has been received, sample.cfg
is copied from the RapiDeploy application folder on the server to
the computer in the specified folder.
Function Specifies the directory where the GRUB boot files are
located. If GRUB is installed on a system, the MBR is re-created
based on the GRUB files when imaging completes. If GRUB files
are located in a non-default directory, use this command to
specifiy their location.
Function Shows command-line help.
Function Sets screen resolution.
For information on setting VESA modes, see
Example To set screen resolution to VGA mode 23
(640x480x16), type
rdeploy -i:23
RapiDeploy Technical Reference
-forceoem
-frm:c:files.txt
-ve:[31.34]
421