Chapter 20: Symantec® Ghost® Imaging - Symantec ALTIRIS DEPLOYMENT SOLUTION 6.9 SP4 - V1.0 Manual

Chapter 20
Symantec® Ghost® Imaging
Deployment Solution
Important
Deployment Solution 6.9 SP1 and later includes the Ghost executable. You do not have
to perform this step to use Symantec Ghost with Deployment Solution versions after 6.9
SP1.
Customers currently using Ghost imaging solutions have the option of copying the Ghost
executable to the Deployment Server to enable Ghost imaging from the Create Disk
Image and Distribute Disk Image tasks.
To add support for Symantec Ghost
1. On the Deployment Share, create a folder called ghost. Copy ghost.exe (for DOS
support) and/or ghost32.exe (for WinPE support) to this folder.
Symantec Ghost is now available for selection in the Create Disk Image and Distribute
Disk Image tasks. A configuration file called ImageTools.ini, located in the root of your
Deployment Share, contains settings you can change to customize the behavior of
Ghost. For example, the default command-line in DOS is:
CreateImageCommandLine=-
clone,MODE=create,SRC=1,DST=%IMAGE_FILENAME% -sure
This setting and others can be customized by modifying ImageTools.ini.
226