Deployment Solution
Parameters
GetApps
GetServices
GetDevices
GetSmbios
EncryptSessions
RequireEncrypt
UseMCast
MCastAddr
MCastPort
TTL
ServerName
TcpAddr
Details
Specifies whether or not to get the Applications at a
"Get Inventory" request.
Example: GetApps=True.
Specifies whether or not to get the Services at a "Get
Inventory" request.
Example: GetServices=True.
Specifies whether or not to get the Devices at a "Get
Inventory" request.
Example: GetDevices=True.
Specifies whether or not to read the Smbios table.
Example: Smbios=True.
Specifies whether or not the ADLAgent will attempt to
make an encrypted session with the server.
Example: EncryptSession=True.
Specifies whether or not the ADLAgent will fail to
connect if an encrypted session cannot be established.
Example: RequireEncrypt=True.
Specifies whether or not to use multicast to find a
Deployment server or make a connect directly to the
Deployment server using the specified IP port and
address.
Example: UseMCast=True.
Specifies the multicast group address to be used to
find the Deployment Server (Optional).
Example: MCastAddr=225.1.2.3.
Specifies the port number to use while multicasting
(Optional).
Example: MCastPort=402.
Specifies the maximum number of hops to multicast
through (Optional).
Example: TTL=32.
Specifies the computer name of the server (Optional).
Example: Server=RADAR.
Specifies the IP address of the Deployment Server to
connect to (Optional). Specifying this parameter will
switch the ADL Agent to use TCP to connect to the
Deployment Server.
Example:
TcpAddr=127.0.0.1
Command-Line Switches
.
385