Symantec ALTIRIS DEPLOYMENT SOLUTION 6.9 SP4 - V1.0 Manual page 394

Deployment Solution
Parameters
EncryptedClientID
Password
AllowMod
Transport
TransportUse
MCastAddr
MCastPort
TTL
ConsoleName
TcpAddr
TcpPort
User Prompts
Details
Specifies the encrypted client ID.
Example: EncryptedClientID=0
Specifies the password.
Example: Password=Altiris
Specifies whether or not to enable or disable security
for admin properties. If the value is 0, the security is
disabled. if the value is 1, the security is enabled.
Example: AllowMod=1
Specifies how AClient will find and connect to a
Deployment Server. To use TCP/IP multicast,
TransportUse=0. To use TCP/IP, TransPortUse=1.
Example: TransportUse=0 or TransPortUse=1.
Specifies the multicast group address to use to locate
a Deployment Server. TransportUse must be 0 for this
setting to work.
Example: MCastAddr=225.1.2.3.
Specifies the multicast port to use to locate a
Deployment Server. TransportUse must be 0 for this
setting to work.
Example: MCastPort=402.
Specifies the Multicast Time to Live to use to locate a
Deployment Server. TransportUse must be 0 for this
setting to work.
Example: TTL=32.
Specifies the server name to use to locate a
Deployment Server via Multicast. If nothing is
specified, AClient will connect to the first Deployment
Server it locates. TransportUse must be 0 for this
setting to work. This is optional.
Example: ConsoleName=ALTIRIS.
Specifies the IP Address or Host Name to use to locate
a Deployment Server.TransportUse must be 1 for this
setting to work.
Example: TcpAddr=172.19.16.20
Specifies the IP port to use to locate a Deployment
Server. TransportUse must be 1 for this setting to
work.
Example: TcpPort=402.
Command-Line Switches
394