Deployment Web Console (Web Console) - Symantec ALTIRIS DEPLOYMENT SOLUTION 6.9 SP4 - V1.0 Manual

Deployment Agent on Linux
Client/Server File Transfer Port
Deployment Solution
Deployment Agent on Windows runs on Windows computers, including desktops,
notebooks, and servers.
To configure the 402 port
1. Click the AClient icon on your desktop. The Altiris Client Service dialog appears.
2. Click Properties. The Altiris Client Service Properties dialog appears. By
default, the Server Connection tab is selected.
3. Select the Connect directly to this Deployment Server option or select the
Discover Deployment Server using TCP/IP multicast option.
4. Enter the port number.
Note: By default, this port number is 402.
Note: When the AClient is connected to the Deployment Server on port 402, it
internally creates a listening UDP socket on port 402 to accept Wake-up packets
from the server.
The Deployment Agent is installed on Linux workstations and server to establish
communication between Linux computers and the Deployment Server. This agent
collects and sends data from the client computer to the Deployment Server, executes
deployment tasks sent from the server, installs packages, and runs management
processes as directed from a Deployment Console.
To configure the 402 port
1. To edit the configure file directly, open the adlagent.conf file at the following path:
/opt/altiris/deployment/adlagent/conf.
2. Change the value corresponding to the TCPport= if necessary. The default value is
402.
3. Restart the ADLAgent service.
To configure the 415 port
1. To edit the configure file directly, open the trace.conf file at the following path: /
opt/altiris/deployment/adlagent/conf.
2. Change the value corresponding to the TcpTracePort= if necessary. The default
value is 415.
3. Restart the ADLAgent service.
Note: Port 415 is used to remotely view debug messages from the ADLAgent. These
messages include the debug information and communication details between the
ADLAgent and the Deployment Server. This port connects to the Remote Client.
Open the Copy File To dialog of the Copy File task and click Advanced. Select the
Copy files using Deployment Server option. The files will be copied using this port.
Network Ports
478