Appendix I: Pocket Pc - Symantec ALTIRIS DEPLOYMENT SOLUTION 6.9 SP4 - V1.0 Manual

To install Pocket PC Client using CAB files
1 Copy the
2 Connect your device to your desktop computer.
3 In ActiveSync, click
4 In Windows Explorer, browse to the CAB file you want to copy.
5 Right-click the file and click
6 Place the cursor in the desired folder for your device, right-click, and click
7 From the device, tap
Browse for the CAB file and tap the file to execute it. When the Pocket PC Client is installed on the
handheld, the Deployment Agent icon appears in the handheld's system tray.
See "Installing Deployment Agent for
Uninstall the Pocket PC Agent
1 Open the Pocket PC Agent status sheet by double-clicking Altiris Pocket PC Agent icon.
2 Click
You can also uninstall the agent by running the
There is no uninstall program for the PPC Client. To remove the Pocket PC Client, you must remove
Note:
the client file from the
Command Line Switches for the Pocket PC Agent
You can also manage the Pocket PC Agent through command-line switches. The Pocket PC Agent is started
using the C:\Program Files\Altiris\PPCAgent\PPCAgent.exe program file. If you need to perform some
function with a command-line switch, run the program file followed by the applicable switch.
To restart the agent, you would run:
C:\Program Files\Altiris\PPCAgent\PPCAgent.exe
The following is a list of the supported switches:
• -stop
Stops the agent.
• -start
Starts the agent after it has been stopped.
• -restart
Stops and restarts the agent.
• -silent
Installs the agent without the installation dialog screens.
• -remove
Stops and uninstalls the agent.
Deployment Solution
file to the host computer with ActiveSync (or to a share where you can copy the file from).
CAB
. Windows Explorer runs the
Explore
Copy
Start > Programs > File Explorer
.
Options > Uninstall
My Device\Windows\ppccInt.exe
Mobile Device
.
.
PocketPC" on page 491.
ppcagent -remove
file on the handheld.
-restart
Pocket PC
window for your device.
.
Paste
switch from the command line.
491