Remote Control Buttons - Dish Network 512 User Manual

Remote Control Buttons

Control the Receiver
When you get the remote, it's already set up to control the receiver. However,
you must set up the remote to control the TV before you can use the MUTE and
VOLUME buttons to control TV sound.
For information on the remote buttons that control the receiver, see Using the
Remote Controls on page 37.
Control a TV (or a Second TV)
Only the buttons described here will control a TV. Some of these buttons may
not control your specific model of TV. Please see your TV's user manual for
information about that TV model's features.
TV Mode Button
You must first set up the remote to control the TV. See Set Up the Remote to
Control Other Devices, beginning on page 85. Then, you must press the TV
mode button to set the remote to TV mode. The TV mode button lights for two
seconds to show you've set the remote to TV mode. Make sure you keep the
remote in TV mode to use the buttons described here to control your TV.
: You can set up the remote to control a second TV in AUX mode, the same
Note
way it controls the first TV in TV mode. See Set Up the Remote to Control
Devices beginning on page 85.
TV/Video Button
If the TV has video input options, use this button to switch the TV video input.
Power Button
Press the TV POWER button to turn the TV on or off.
Mute Button
Press the MUTE button to turn the TV sound on or off.
Control Other Devices with the Remote Control
Tip: If some of the
buttons on the
remote control do
not control the TV
that you have set up
in TV mode, then try
other codes. See
page 85 for details.
Page 89