Installing And Testing Your Scanner - Xerox PAGIS PRO 2.0 User Manual

I
NSTALLING AND
2–2
Contents
T Y
ESTING OUR
Using built-in ISIS drivers, Pagis Pro works with many popular
desktop scanners. In addition, with its support of the TWAIN
standard, Pagis Pro can work with scanners and other devices,
such as digital cameras, that provide their own TWAIN source
drivers.
Check the Pagis Pro home page on the World Wide Web for the
Note
latest list of supported scanners and digital cameras:
http://www.pagis.com
Scanners usually require a system-level driver or a TWAIN source
driver, which is provided by the scanner or interface card manu-
facturer. Consult the scanner documentation for details
about installing your scanner, interface card, and driver.
The basic steps for installing a scanner are to:
1. Install the correct scanner interface card (if one is necessary) in
the PC bus. Note that many scanners simply plug into the PC's
standard serial or parallel port.
2. Hook up the scanner to the interface card or standard port with
the correct cable, and power up the scanner and the PC.
3. Install the system-level scanner driver (.SYS) file, or TWAIN
source driver on your PC hard disk, as directed by the scanner
documentation.
4. Test the scanner using software tools provided by the manu-
facturer. After the scanner is functioning, go on to install, and
link your scanner to, Pagis Pro software.
If your scanner runs independently of Pagis Pro, you can be sure
that it is functioning correctly. Setting it up to run with Pagis Pro
should then be a simple matter.
Pagis Pro User's Guide
Index
S
CANNER