Xerox PAGIS PRO 2.0 User Manual page 221

Specify custom paper
width and length
Click OK when done
Specify resolution
Darken or lighten
the image
Click OK when done
Contents
Figure 5–2. User-defined size dialog box
To specify a custom size, type a new width and length, and
click OK to close the User-Defined Size dialog box.
In the Properties dialog box, click the Graphics tab to bring
this set of properties to the front (Figure 5–3).
Figure 5–3. Graphics properties for Pagis Print Driver
Specify graphic resolution (100 or 300 dots per inch).
Examples and Tips
Index
Specify
measurement
units
Specify dither
pattern
Specify color
control options
5–15