Xerox PAGIS PRO 2.0 User Manual page 102

Find and select your
scanner or digital
camera driver
Click ISIS only or TWAIN
only to narrow the list
4–28
Contents
Selecting the scanner or digital camera driver
To select your scanner or digital camera driver from the Scan
Tool, use the following procedure.
This procedure assumes that you have already connected the
Note
scanner to your PC and installed any system-level driver or a
TWAIN source driver provided by your scanner manufacturer.
Consult the scanner documentation for details about installing
your scanner, interface card, and driver.
1. Launch the Scan Tool by selecting the Scanner icon from
the Pagis ToolBar.
2. With the Scan Tool Scanner tab displayed (refer to
Figure 4–15), click:
The Select Scanner dialog box (Figure 4–16) now appears.
Figure 4–16. Select Scanner dialog box
Pagis Pro User's Guide
Index
Click when
done
Click to
configure
the driver