New Features Of 10.3.2 B 201; Title-Block Setting Removed From Scanner Ui Menu (10.3.1); Remote Media Mismatch For 6030/6050 (10.3.1) - Xerox 850DP - Phaser Color Solid Ink Printer Release Note

6 New Features of 10.3.2 b 201

Version 10.3.2 build 201 is intended to be a SPAR release for the HFT, and PUN controllers,
there are no new features beyond 10.3.1.
The following is a list of new features since version 10.2 of the Accxes Controller.
6.1 Title-block setting removed from Scanner UI
menu (10.3.1)
The menu entry for setting the title-block location has been removed from the scanner UI menu in
favor of the ICON on the main copy screen. When a fold program is selected, the Accxes system
will display an ICON on the main copy screen to indicate the location of the title-block. The NEXT
and PREVious keys can be used to change the location and it is immediately reflected by a
change to the ICON.

6.2 Remote Media Mismatch for 6030/6050 (10.3.1)

Accxes version 10.3.1 now supports remote media mismatch for the 6030 / 6050 printers. The
feature can be found in WebPMT:
PRINTER DEFAULTS>PROCESSING DEFAULTS>Media
When this feature is enabled, Accxes will submit the page to the remote printer regardless of
installed media. If the required media is not installed, the 60X0 will mismatch for the appropriate
media and WebPMT will display "Printer Needs Attention" until the mismatch is resolved. Accxes
will never mismatch block.
When this feature is disabled, Accxes media mismatch will work the same as it does for all other
supported IOTs.
The Mismatch Queuing feature is mutually exclusive of this new setting. It will work as it always
has regardless of this setting.
Page 11