Xerox PAGIS PRO 2.0 User Manual page 132

Scanned pages to be copied
are stored here temporarily
When all pages are
scanned, click to print
4–58
Contents
2. Click the Copy tool on the Pagis ToolBar.
This starts up the Pagis Scan Tool with the Copier tab in front
(refer to Figure 4–26).
If you want to copy only a portion of the page, you can use the
Prescan button. For information about using Prescan, refer to an
earlier section, "Using Prescan to scan part of a document."
3. Begin the copy process by clicking the Copy button on the
Copier tab.
As the page is being scanned, a Copier Progress dialog box
tracks scanning status. After the page is completely scanned, it is
printed immediately and the Copier tab (refer to Figure 4–26) is
redisplayed.
However, if you have collation turned on, the page appears as
Page 1 in the Copier Progress dialog box. Additional buttons are
added to copy more pages or begin the printing phase of the copy
process (Figure 4–27).
Figure 4–27. Copier Progress dialog box
Pagis Pro User's Guide
Index
Click to scan more
pages to be copied