Scanning A Document - Xerox PAGIS PRO 2.0 User Manual

S D
CANNING A
Specify the document type
Scan to a XIF file, or select
from a list of applications to
which to scan directly
3–6
Contents
OCUMENT
To scan a hard copy document into Pagis Pro, use the Scan button
on the Pagis ToolBar, as follows.
This procedure assumes that you have properly connected your
Note
scanner and it is working with Pagis Pro. Also, this basic proce-
dure uses the scanning defaults built into Pagis Pro. For more
details about the Scan Tool settings, please refer to Chapter 4.
1. Place the page(s) to be processed into the scanner.
If you have a scanner with an automatic document feeder, you
can load a stack of pages. If you have a flatbed scanner, place the
first page of the document on the platen.
2. Click the Scan icon on the Pagis ToolBar to display the
Scanner tab (Figure 3–4).
Figure 3–4. Scanner tab in the Scan Tool
Pagis Pro User's Guide
Index
Click to start scanning
Click to specify scanner
settings, refinements,
and file attributes