Xerox PAGIS PRO 2.0 User Manual page 119

Contents
Scanning a double-sided document to a XIF file
If your scanner is equipped with an automatic document
feeder (ADF), you can scan a stack of pages and have Pagis Pro
process them continuously.
Additionally, with an ADF, you can process double-side docu-
ments and have Pagis Pro automatically collate them.
This feature is available only on scanners with an ADF, or
Note
sheetfed scanners that can accept a stack of pages. It does not
work with flatbed or single-page-at-a-time sheetfed scanners.
To scan a double-sided document:
1. Place the double-sided document in the scanner's docu-
ment feeder so that the front sides of the pages will be
scanned first.
On a 10-page document, for example, place the document so that
pages 1, 3, 5, 7, and 9 would be scanned first.
2. Click the Scan icon on the Pagis ToolBar to display the
Scanner tab (refer to Figure 4–15).
3. Select the page type of the document to be scanned.
Select the page type that most closely approximates the
document you intend to scan. If you are not sure, the Any
Document page type is the default and works well for most
documents.
Select Letter if you are scanning a simple black and white
document (letter, memo, or report for example). Scanning is
faster and the file will take up little space.
Select Magazine Article if your document has both text and
pictures. Even if the pictures are black and white, the scanned
document will contain better looking results.
Using Pagis Pro
Index
4–45