Other Settings; Misc. Settings - HP 630n - JetDirect Gigabit EN Print Server Administrator's Manual

Other Settings

Use this tab to provide access to a variety of management and printing configuration options. The
following tabs are discussed:
●
Misc. Settings on page 79
●
Firmware Upgrade on page 81
enhancements
●
LPD Queues on page 81
printing services
●
USB Settings on page 83
●
Support Info on page 84
●
Refresh Rate on page 84
page updates

Misc. Settings

Use the Misc. Settings tab to set a variety of advanced protocols and features, as described in
4-13 Miscellaneous Settings on page
Table 4-13 Miscellaneous Settings
Item
SLP Config
Telnet Config
Bonjour
Multicast IPv4
9100 Config
FTP Printing
LPD Printing
IPP Printing
ENWW
Enable miscellaneous advanced protocols and functions
Update your HP Jetdirect print server with new features and
Set up print queues used in printing with line printer daemon (LPD)
(External print servers only.) Configure USB connection parameters
Set up the Support link located under Other Links in the left margin
Set the time interval (in seconds) for embedded Web server diagnostic
79.
Description
Enable SLP, which is used by certain client application software to automatically discover
and identify the HP Jetdirect print server.
If SLP uses multicast protocols, you must enable Multicast IPv4.
Use Telnet to access to HP Jetdirect configuration parameters. For more information, see
TCP/IP configuration on page
Use Bonjour services (formerly listed as Multicast Domain Name System [mDNS]
services). Bonjour is typically used for IP address and name resolution (through UDP port
5353) where a conventional DNS server is not used.
For Bonjour operation, you must enable Multicast IPv4.
Use the receipt and transmission of IP version 4 multicast packets by the print server.
NOTE: If disabled, other protocols that use multicast protocols, such as Bonjour and SLP,
might also be disabled.
Use port 9100 services. This is an HP-proprietary raw TCP/IP port on the HP Jetdirect print
server and is the default port for printing. It is accessed by HP software, such as the HP
Standard Port.
Use FTP services available on the HP Jetdirect print server for printing. For more
information, see FTP printing on page
Use LPD services on the HP Jetdirect print server. LPD provides line printer spooling
services for TCP/IP systems. For more information, see
Use IPP on the HP Jetdirect print server. If the printer is properly connected and accessible,
IPP allows printing to this device over the Internet (or intranet). A properly configured IPP
client system is also required. For information on IPP client software, see
solutions summary on page
15.
165.
LPD printing on page
7.
Table
155.
HP software
Networking tab 79