The IPsec/Firewall capabilities depend on the HP Jetdirect print server product and the printer/MFP in
which it is installed. The following capabilities are available:
●
Value-featured print servers do not support IPsec/Firewall operation.
●
Full-featured print servers and printers/MFPs that support IPsec can control IP traffic by using both
firewall and IPsec protection.
●
Full-featured print servers and printers/MFPs that do not support IPsec can control IP traffic using
firewall protection only.
To configure the print server for IPsec/Firewall operation, use the embedded Web server through your
browser. For more information, see
Supplied manuals
For information about your HP Jetdirect print server, see the following manuals:
●
Start or use guides, or equivalent printer documentation (shipped with printers that have factory-
installed HP Jetdirect print servers).
●
This manual, the HP Jetdirect Print Server Administrator's Guide for the applicable HP Jetdirect
product models.
HP support
HP online support
Visit the HP Web site 24 hours a day, 7 days a week at:
http://www.hp.com/support/net_printing
Firmware upgrades
Full-featured HP Jetdirect print servers support firmware upgrades of new or enhanced features. If a
firmware upgrade is available for your print server model, you can download and install the upgrade
over your network. To check for and download available upgrades, visit the Hewlett-Packard Web site
at:
http://www.hp.com/go/webjetadmin_firmware
Firmware installation tools
Install firmware upgrades for supported HP Jetdirect print servers over a network by using one of the
following installation tools:
●
HP Jetdirect download manager (Windows) Download from HP online support at:
http://www.hp.com/go/dlm_sw
●
HP Web Jetadmin For more information about supported systems, visit HP Web Jetadmin at:
http://www.hp.com/go/webjetadmin
ENWW
IPsec/Firewall configuration (V.38.xx) on page
97.
Supplied manuals
5