Advanced Tab - HP 630n - JetDirect Gigabit EN Print Server Administrator's Manual

2. Change the precedence table to the following:
BOOTP/DHCPv4
DHCPv6
TFTP
Manual
Default
3. Press Clear Previous Values and Reinitialize Now.

Advanced tab

Use this tab to configure additional TCP/IP parameters.
Table 4-9 TCP/IP Advanced tab
Item
Idle Timeout
LPD Banner Page
System Contact
System Location
Automatic
Manual cURL
Manual Settings
Proxy Server
Proxy Server Port
74 Chapter 4 Embedded Web server (V.38.xx)
Description
(IPv4 or IPv6) Number of seconds that an idle connection is allowed to remain open.
The default is 270 seconds. Enter to 3600 seconds. If set to 0, the timeout is disabled
and TCP/IP connections remain open until closed by the device at the other end of the
network (for example, a workstation).
(IPv4 or IPv6) Print an LPD banner page for print jobs. For currently supported print
servers, only Port 1 is available.
(IPv4 or IPv6) Person who administers or services this device.
If set, displayed on the Protocol Info page, and the HP Jetdirect Home tab, if available.
(IPv4 or IPv6) Physical location of the device or related information. Enter up to 64
alphanumeric characters.
If set, displayed on the Protocol Info page, and the HP Jetdirect Home tab, if available.
(IPv4 only) Web proxy discovery is automatically initiated (default).
(IPv4 only) Web proxy server is automatically selected using a configuration script that
is based on the user location. Specify the script by entering the URL in this field.
(IPv4 only) Web proxy defaults are set manually using the following methods:
(For printers/MFPs that support this feature)
(IPv4 only) Proxy server to use by embedded applications in your printer/MFP. Enter
up to 64 alphanumeric characters. A proxy server is typically used by network clients
for Internet access. It caches Web pages and provides a degree of Internet security for
those clients.
Enter its IP address or FQDN.
On some networks, you might need to contact your ISP for the proxy server address.
(For printers/MFPs that support this feature)
(IPv4 only) Port number used by the proxy server for client support. Enter a value from
0 to 65535. The port number identifies the port reserved for proxy activity on your
network.
ENWW