Access Control - HP 630n - JetDirect Gigabit EN Print Server Administrator's Manual

Table 4-17 Certificate configuration screens (continued)
●
●
●
●
●
Install Certificate or Install CA Certificate screens.
Use the Install Certificate screen to install an HP Jetdirect certificate. (The Install Certificate option is not presented if there
is no pending request.)
Use the Install CA Certificate screen to install a trusted certificate authority (CA) certificate for use during EAP authentication.
(Full-featured print servers only.)
●
Import Certificate and Private Key screen. Import an HP Jetdirect certificate and private key.
●
Export the HP Jetdirect certificate and private key screen. Export the installed HP Jetdirect certificate and private key to a
file.
●

Access Control

Use this tab to display the access control list (ACL) on the HP Jetdirect print server. An ACL (or host
access list) specifies individual host systems, or networks of host systems, that are allowed to access
the print server and the attached network device. You can add up to 10 entries. If the list is empty (no
hosts are listed), any supported system can access the print server.
NOTE: Not all print servers or devices support ACL, and support is limited to IPv4 networks. For
improved security and performance, use the IPsec/Firewall feature (if available) instead of ACL.
By default, hosts with HTTP connections (such as, the embedded Web server or IPP) can access the
print server regardless of access control list entries. To disable HTTP host access, clear the Allow Web
Server (HTTP) access check box at the bottom of the list.
90 Chapter 4 Embedded Web server (V.38.xx)
If the default IP address 192.0.0.192 is set on the HP Jetdirect print server, it is probably invalid for your
network. Do not use this default address to identify your device.
Organization (Required) Specify the full legal name for your company.
Organizational Unit (Optional) Specify your department, division, or other subgroup of your organization.
City/Locality (Required) Enter the city or locality in which your organization is located.
State/Province (Required for all countries/regions) Must contain at least three characters.
Country/Region Two-character ISO 3166 country/region code. For example, use gb Great Britain or us for
USA (required).
Install a privacy enhanced mail (PEM/Base64) encoded certificate.
To install a certificate, specify the name and path of the file that contains the certificate. Or, click Browse to
browse your system for the file.
Click Finish to complete the installation.
To install a certificate, it must be associated with a pending certificate request by the embedded Web server.
Import an HP Jetdirect certificate and private key. When imported, the existing certificate and private key are
overwritten.
The file format must be PKCS#12 encoded (.pfx).
To import a certificate and private key, specify the name and path of the file that contains the certificate and
private key. Or, click Browse to browse your system for the file. Then enter the password that was used to
encrypt the private key.
Click Finish to complete the installation.
To export a certificate and private key, enter a password to use to encrypt the private key. Enter the password
again to confirm it. Then click Save As to save the certificate and private key in a file on your system. The
file format is PKCS#12 encoded (.pfx).
ENWW