Configure Settings For A Wired Network - HP Jetdirect ew2500 - 802.11b/g Wireless Print Server Setup Manual

5. Select the configuration method.
NOTE:
Although you can configure without a network cable (wireless), it is generally easier to configure
using the included network (LAN) cable.
6. Follow the instructions through the remaining screens to complete your wireless configuration.
7. When you have configured the HP Jetdirect print server with a wireless connection to your network,
do the following:
●
Print an HP Jetdirect configuration page to confirm your settings.
●
To install the printer on your PC, continue with the instructions displayed.
After your printer is configured with a network connection, it may be installed on your network computers
or servers similar to other network printers. To install the printer, go to
system or server on page
If you are unable to communicate with the printer over your network, see
on page 28.

Configure settings for a wired network

A network connection is required before you can discover and install the printer on your network
systems. To configure a wired connection, verify the following:
● You have a computer with one of the following operating systems:
◦
Microsoft Windows XP, Vista, Server 2003, or Server 2008.
◦
Apple Mac OS X 10.2 or greater.
●
You have installed the HP Jetdirect print server hardware and have printed an HP Jetdirect
configuration page.
ENWW
HP recommends that you configure the wireless settings using a network cable (wired).
23.
Install the printer on a network
Troubleshooting
Configure settings for a wired network 17