HP 630n - JetDirect Gigabit EN Print Server Administrator's Manual page 146

Table 8-5 Security Settings (continued)
Message
Admin Password
Cert Expires
SNMP Versions
SNMP Set Cmty Name
SNMP Get Cmty Name
136 Chapter 8 HP Jetdirect configuration pages
Description
Disabled IPsec/Firewall is turned off.
Policy Failed Print server failed to implement the selected IPsec policy. You might need
to reset security (control panel or embedded Web server), or perform a cold reset.
IP Administrator password is set on the print server. This password is shared by Telnet,
the embedded Web server, and HP Web Jetadmin to control access to print server
configuration parameters. (Consists of up to 16 alphanumeric characters.)
Not Specified Password not set.
Set Password is set.
Clear the password, using a cold reset.
Expiration date of the digital certificate for SSL/TLS encrypted security. The date is in
UTC format (for example, "2012-10-02 12:45 UTC").
Not Applicable Digital certificate is not installed.
SNMP versions enabled on the print server.
Disabled All SNMP versions disabled. No SNMP access is allowed.
1;2 SNMP v.1 and SNMP v.2c supported. SNMP v.3 is disabled, or not supported.
1;2;3-na/np SNMP v.1, v.2c, and v.3 enabled. v.3 is enabled with the minimum security
of no authentication (na) and no privacy (np).
1;2;3-a/np SNMP v.1, v.2c, and v.3 enabled. v.3 is enabled with the minimum security
of authentication enabled (a) but no privacy (np).
1;2;3-a/p SNMP v.1, v.2c, and v.3 enabled. v.3 is enabled with the minimum security of
authentication (a) with privacy (p) enabled.
3-na/np SNMP v.1 and v.2c disabled. SNMP v.3 is enabled with the minimum security
of no authentication (na) and no privacy (np).
3-a/np SNMP v.1 and v.2c disabled. SNMP v.3 is enabled with the minimum security of
authentication enabled (a) but no privacy (np).
3-a/p SNMP v.1 and v.2c disabled. SNMP v.3 is enabled with the minimum security of
authentication (a) with privacy (p) enabled.
SNMP set community name is configured on the HP Jetdirect print server. An SNMP
set community name is a password for write access to SNMP control functions (SNMP
SetRequests) on the HP Jetdirect print server.
Not Specified SNMP set community name is not set.
Specified User-specified SNMP set community is set.
SNMP get community name is configured on the HP Jetdirect print server. This is a
password to determine which SNMP GetRequests the HP Jetdirect print server
responds to. If a Get community name is set, the print server responds to either a user
specified community name or the factory-default.
ENWW