Wizard - HP 630n - JetDirect Gigabit EN Print Server Administrator's Manual

Wizard

NOTE: If you use HP Web Jetadmin to manage your devices, do not use this wizard. Instead, use HP
Web Jetadmin to configure your network security settings.
Select the Wizard tab to open the initial Wizard page. If prompted with security alerts, click Yes to
proceed.
The Wizard page identifies the current security level last configured on the print server. If a security
level was not configured, the security level is None. However, if HTTPS is required for access to the
networking pages, the default setting indicates Custom.
This page also allows you to run the HP Jetdirect Security Configuration Wizard to set or change the
current security level. This wizard guides you through the print server's security configuration settings
for your network. Click Start Wizard to run the wizard and open the Security Level page.
The optional configuration parameters presented by the wizard depend on your choice of security level.
For an overview, see
NOTE: If you improperly exit the wizard (for example, by failing to use the Cancel button), an
Operation Failed screen appears. If this occurs, wait approximately two minutes and restart the wizard.
Table 4-16 Wizard Security Levels
Security Level
Basic Security
ENWW
Table 4-16 Wizard Security Levels on page
Description
Requires that you configure an administrator password for configuration management. The
administrator password is shared with other management tools, such as Telnet and SNMP
applications. However, some management tools, such as Telnet, use plain-text
communications and are not secure.
Use the Administrator Account page to enter the administrator password. The
administrator password is also used as the SNMP v1/v2 Set Community Name for SNMP
management applications.
NOTE: To clear the administrator password, apply blank entries using Custom
Security, or see the Admin. Account page accessed through the Authorization menu.
The Configuration Review page displays all the current settings that affect security. Click
Finish to set your security selections.
85.
Networking tab 85