Advanced; Mac Address Filter - D-Link DIR-505 User Manual

Section 3 - Configuration
Use MAC (Media Access Control) Filters to authorize wireless clients by their MAC addresses to access your network. When
enabled, any client not on the MAC filter list will not be able to access your network.
When Disable is selected, MAC addresses are not
MAC Address
Filter: used to control network access.
When Turn. MAC. Filtering. ON. and. ALLOW. computers.
listed... is selected, only computers with MAC addresses
listed in the MAC Address List are granted network access.
When Turn.MAC.Filtering.ON.and.DISALLOW.computers.
listed... is selected, any computer with a MAC address listed
in the MAC Address List is refused access to the network.
MAC Address: Enter the MAC address you would like to filter. You can select
a client currently connected to your access point from the
Wireless.Client.List drop-down menu and then click << to
populate the MAC Address field.
Click Save.Settings to activate and save.
Clear: Click to remove the client from the MAC address filter rule.
D-Link DIR-505 User Manual

Advanced

MAC Address Filter

135