Repeater Mode - D-Link DIR-505 User Manual

Section 3 - Configuration
Enable Wireless:
Check the box to enable the wireless function. If you do
not want to use wireless, uncheck the box to disable all
the wireless functions. You may also set up a specific time
range (schedule). Select a schedule from the drop-down
menu or click Add.New to create a new schedule.
Wireless Mode:
Select Repeater.Mode from the drop-down menu.
Site Surveys:
Scans for available Wi-Fi networks.
Wireless
When you are browsing for available wireless networks,
Network Name:
this is the name that will appear in the list (unless Visibility
Status is set to Invisible, see below). This name is also
referred to as the SSID. For security purposes, it is highly
recommended to change from the default network name.
Channel Width:
Select the appropriate channel width between 20MHz or
Auto.20/40MHz from the drop-down menu.
Security Mode:
Select WEP or WPA Personal. Refer to page 88.
D-Link DIR-505 User Manual

Repeater Mode

106