Lan Setup - D-Link DIR-505 User Manual

Section 3 - Configuration
This section will allow you to change the local network settings of the access point and to configure the DHCP settings.
Device Name:
Enter the Device Name of the AP. It is recommended to
change the Device Name if there is more than one D-Link
device within the subnet.
LAN Connection
Dynamic IP (DHCP) automatically obtains an IP address
Type:
on the LAN/private network.
IP Address:
Enter the IP address of the access point. The default IP
address is 192.168.0.1. If you change the IP address, once
you click Save, you will need to enter the new IP address
in your browser to get back into the configuration utility.
Subnet Mask:
Enter the Subnet Mask assigned by your ISP.
Local Domain
Enter the local domain Name.
Name:
DHCP Server
Configure the built-in DHCP server to assign IP addresses
Settings:
to the computer on your network.
D-Link DIR-505 User Manual

LAN Setup

132