Lan Setup - D-Link DIR-505 User Manual

All-in-one mobile companion
Hide thumbs Also See for DIR-505:
Table of Contents

Advertisement

Section 3 - Configuration
This section will allow you to change the local network settings of the access point and to configure the DHCP settings.
Device Name:
Enter the Device Name of the AP. It is recommended to
change the Device Name if there is more than one D-Link
device within the subnet.
LAN Connection
Use the drop-down menu to select Dynamic IP (DHCP)
Type:
to automatically obtain an IP address on the LAN/private
network.
IP Address:
Enter the IP address of the access point. The default IP
address is 192.168.0.50. If you change the IP address, once
you click Apply, you will need to enter the new IP address
in your browser to get back into the configuration utility.
Subnet Mask:
Enter the Subnet Mask assigned by your ISP.
Gateway
Enter the Gateway assigned by your ISP.
Address:
D-Link DIR-505 User Manual

LAN Setup

107

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents