Repeater Mode - D-Link DIR-505 User Manual

Section 2 - Installation
1. Move the switch to "Repeater Mode". Then, plug the DIR-505
into a wall outlet and verify that the power LED has turned green.
2. From your laptop or mobile device go to your Wireless Utility to
display the available wireless networks and select the network
that is displayed on your companion card (ex: dlink-a8fa). Then,
enter the Wi-Fi password included in your card (akbdj1936).
3. Open a web browser. First time users will automatically be directed
to the pre-wizard. Please follow the on-screen instructions to complete
the setup.
If this is your second time type http://dlinkrouter in the address bar.
Click Launch Wireless Setup Wizard to continue.
D-Link DIR-505 User Manual

Repeater Mode

Repeater
90mm
D-Link DIR-505 Mobile Companion Wi-Fi Configuration Note
Web browser link: Web browser link:
http://dlinkrouter or http://dlinkrouter or
http:// 192.168.0.1 http:// 192.168.0.1
Default configuration Your configuration
Username: "Admin" Username: Admin
Password: "" (leave the field blank) Password:
Wi- Fi Name (SSID) :
54mm Wi- Fi Name (SSID) :
dlinka8fa
Wi-Fi Password :
Wi-Fi Password :
akbdj19368
15