Suites Reports; Viewing A Predefined Report - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - REFERENCE 10.3 30-03-2010 Reference Manual

33.1.4 Suites Reports

Report Title
Discovered Standalone
Components

33.2 Viewing a Predefined Report

The ZENworks Reporting Server must be installed and configured before you can use the
predefined reports. For information, see the
Server Installation Guide.
1 In the ZENworks Control Center, click the Reports tab.
2 In the ZENworks Reporting Server panel, click ZENworks Reporting Server InfoView.
The InfoView is the main interface for working with the ZENworks Reporting Server reports.
3 Click Document List.
4 Navigate to the All > Public Folders > Novell ZENworks Reports > Predefined Reports > Asset
Management > License Management folder.
The Asset Management reports are organized in four subfolders: License Allocation,
Purchases, Software Compliance, and Suites. For a brief description of each report, see
Section 33.1, "Predefined Reports," on page
5 Open the folder that contains a report you want to view.
6 Double-click the report to view it.
Description
Lists the individual components of a suite that have been discovered
through an inventory scan of devices. For each component, lists the
number of installations and how many are being used.
ZENworks 10 Configuration Management Reporting
197.
Working with ZENworks Reporting Server Reports 199