Monitoring Usage; Discovered Products List; Licensed Product's Compliance Status Page - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - REFERENCE 10.3 30-03-2010 Reference Manual

Monitoring Usage

2 0
There a several locations in ZENworks
products. The following sections cover these locations:
Section 20.1, "Discovered Products List," on page 137
Section 20.2, "Licensed Product's Compliance Status Page," on page 137
Section 20.3, "Discovered Product's Installation/Consumption Page," on page 138

20.1 Discovered Products List

The Active Usage column in the Discovered Products list displays the number of installations of a
product that have been used during the current usage period.
1 In ZENworks Control Center, click the Asset Management tab.
2 On the License Management page, click Discovered Products.
You can do the following to manipulate the data in the list:
The Usage Period field, displayed above the list, determines the time period for the usage
data. To change the time period, click Action > Update Usage Time Period, select a new
usage period, then click OK.
Filter the list to display only the products that have been used. In the Search panel, set the
Usage Status field to With Usage, then click Search.
If you want to see the usage hours for each installation, you can drill down into the discovered
product. See "Discovered Product's Installation/Consumption Page" on page
20.2 Licensed Product's Compliance Status
Page
A licensed product's Compliance Status page shows the same usage data as the Discovered Products
list. The difference is that the Compliance Status page displays only the discovered products
assigned to the licensed product.
To access a licensed product's Compliance Status page:
1 In ZENworks Control Center, click the Asset Management tab.
2 On the License Management page, click Licensed Products.
®
Control Center where you can view basic usage data for
20
138.
Monitoring Usage 137