Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - REFERENCE 10.3 30-03-2010 Reference Manual page 50

2 In the Administrator-Defined Fields panel, click Licensed Product to display the Licensed
Product Fields page.
3 Click New to launch the New Administrator-Defined Field Wizard. Complete the wizard by
using information from the following table to fill in the fields:
Wizard Page
General Information
50 ZENworks 10 Asset Management Reference
Details
Fill in the following fields:
Type: Filled in by default depending on the type of field you selected.
Name: Specify the field label. This field is required.
Default Value: Specify the default value of the field. The default value
must be valid for the field's data type. For example, the default cannot
be if the data type is Integer.
A
Data Type: Select the type of data allowed in the field: Character,
Integer, Decimal, or Date.
Size: Specify the maximum number of alphanumeric characters
allowed in the field. This applies only to character-type fields.
Edit Type: Determines how you enter values into the field. There are
three options you can select:
Edit: Allows you to enter a value or edit the default value.
List: Allows you to select a value from a list of values.
Combo: Allows you to select a value from a list of values or enter
a new value.
Edit Mask: Select a format from the Edit Mask field list to restrict how a
value is entered. The choices are phone, time, and currency. This
applies only to character-type fields.