Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - REFERENCE 10.3 30-03-2010 Reference Manual page 93

Standard, KMD, Insight,
CompuCom, and SHI Fields
18 LicensesPerPackage
19 ResellerSKU
20 MfrPart#
21 PurchaseQty
22 Serial#
1
23 Site
1
24 Department
1
25 CostCenter
26 Comment
Softchoice Fields Description
The number of licenses included in each
purchased product unit.
For example, if the product is a 5-pack, this value
is 5. The default is 1. Range values (for example,
1-25) are not supported and cause the line item
to be skipped during import.
The Manufacturer, ProductName, Version,
ProductType, and LicensesPerPackage fields
are used to determine the existence of a unique
product.
SKU The SKU number assigned by the reseller. This
value might be important when communicating
with a particular reseller.
The maximum field length is 32 characters.
MFGSKU The part number assigned by the manufacturer.
If available, this value can often be used to
distinguish one product from another.
The maximum field length is 32 characters.
QTYORD The number of product units purchased in the
order.
This must be a single value. Range values (for
example, 1-25) are not supported and cause the
record to be skipped during import.
The value must be between -1000000 and
1000000.
The software serial number associated with the
ordered product
The maximum field length is 40 characters.
The Site, Department, and CostCenter fields are
used for tracking demographics. You can
associate a line item with a value in any or all of
these columns so that license quantities can be
summarized within a particular demographic. For
these values to be meaningful, corresponding
demographics must be associated with devices
in the ZENworks Asset Management inventory.
The maximum field length is 32 characters.
COMMENTS A text field for general comments about the
purchased product.
The maximum field length is 128 characters.
Working with Purchase Records 93