Table of Contents
Advertisement
2 Select Novell Client Properties.
3 Select the Protocol Preferences tab.
Action: Bind IPX on the client running the Server Consolidation Utility:
1 Obtain the latest Novell Client software and run the installation program.
2 Select the appropriate language and click Next.
3 Select Custom and click Next.
4 Click the radio button next to one of the following two choices:
5 Click Next > Next > Finish.
Action: Ensure that the correct smdr.nlm and tsa.nlm are loaded on the server.
1 On the server console, enter unload smdr.
2 Enter smdr new.
3 Enter N when asked if you want to disable NDS.
4 Enter N when asked if you want to disable SLP.
5 Enter N when asked if you want to disable SAP.
6 Enter N when asked if you want to disable name resolution through
7 Enter load smdr on the server console.
8 Enter load tsafs on the server console.
NUWAGENT Won't Load (NetWare 4.2 Only)
Possible Cause: Clibaux.nlm is not loaded.
Action: Go to the server specified in the error message and at the server console, enter
load clibaux.nlm.
NDPS Printer Agents Don't Migrate
Possible Cause: If after a migration, it appears NDPS
possible that eDirectory
Action: Wait for a few minutes, then check again to see if eDirectory has been updated
to reflect the Printer Agent migration.
Action: If the Printer Agents have still not migrated after allowing eDirectory to
synchronize, ensure the Novell Distributed Print Services
(ndpsm.nlm) is loaded on either the source or destination server.
If the Protocol window displays both IP and IPX, the client has IPX
bound.
If the Protocol window displays only IP, then IPX needs to be bound on
the workstation.
• IP and IPX
• IP with IPX compatibility
TIP: You can select this choice if you are running in an scmd
environment.
sys:\etc\hosts file.
has not had time to properly synchronize.
TM
®
Printer Agents have not migrated, it is
Manager
TM
Troubleshooting Server Consolidations
87
Advertisement
Table of Contents
Troubleshooting
