Table of Contents
Advertisement
Troubleshooting Server
9
Consolidations
Refer to the appropriate section if you are having trouble.
9.1 Troubleshooting the Server Consolidation
Utility
•
"General Troubleshooting" on page 81
•
•
•
"NDPS Printer Agents Don't Migrate" on page 87
•
"NUWAGENT Won't Load (NetWare 4.2 Only)" on page 87
•
"Server Consolidation Performance Problems" on page 83
•
"Volume Contents Do Not Display" on page 82
•
•
"Errors When Connecting to a NetWare 4 Server" on page 85
General Troubleshooting
Explanation: In general, when troubleshooting errors in the Server Consolidation Utility,
first ensure that the latest smdr.nlm and tsafs.nlm modules are loaded
on the source and destination NetWare servers.
The log files contain detailed information about what was successfully copied
(success log) and what was not copied and why (error log). The log files are
written to the project folder, which is located by default in My Documents.
Utility Hangs when Selecting Source and Destination Trees
Problem: When running the Server Consolidation Utility on a Windows 2000
workstation, the application hangs when selecting the source and destination
trees for the consolidation project.
Action: Install Windows 2000 SP 2 or later on the workstation to correct this issue.
Contents of the eDirectory Container Can't Be Listed
Possible Cause: Your workstation is not running the latest support pack update of the Novell
Client
Action: Download the latest version of the Novell Client 4.91 software from the
Novell Downloads page (http://www.novell.com/download)
your workstation. See
workstation requirements.
for Windows 2000/XP version 4.91.
TM
"Workstation Requirements" on page 35
®
and install it on
for other
9
81
Advertisement
Table of Contents
Troubleshooting
